| range | Compact | |
|---|---|---|
| product name | Compact NSX | |
| product or component type | Circuit breaker | |
| device short name | Compact NSX630F | |
| device application | Distribution | |
| poles description | 3P | |
| protected poles description | 3t | |
| network type | AC | |
| network frequency | 50/60 Hz | |
| [In] rated current | 630 A at 40 °C | |
| [Ui] rated insulation voltage | 800 V AC 50/60 Hz | |
| [Uimp] rated impulse withstand voltage | 8 kV | |
| [Ue] rated operational voltage | 690 V AC 50/60 Hz | |
| Breaking capacity code | F 36 kA 415 V AC | |
| breaking capacity | 40 kA Icu at 220/240 V AC 50/60 Hz conforming to IEC 60947-2 85 kA at 240 V AC 50/60 Hz conforming to UL 508 25 kA Icu at 500 V AC 50/60 Hz conforming to IEC 60947-2 36 kA Icu at 380/415 V AC 50/60 Hz conforming to IEC 60947-2 10 kA Icu at 660/690 V AC 50/60 Hz conforming to IEC 60947-2 35 kA at 480 V AC 50/60 Hz conforming to UL 508 20 kA at 600 V AC 50/60 Hz conforming to UL 508 20 kA Icu at 525 V AC 50/60 Hz conforming to IEC 60947-2 30 kA Icu at 440 V AC 50/60 Hz conforming to IEC 60947-2 | |
| [Ics] rated service breaking capacity | 40 kA at 220/240 V AC 50/60 Hz conforming to IEC 60947-2 36 kA at 380/415 V AC 50/60 Hz conforming to IEC 60947-2 10 kA at 660/690 V AC 50/60 Hz conforming to IEC 60947-2 10 kA at 525 V AC 50/60 Hz conforming to IEC 60947-2 25 kA at 500 V AC 50/60 Hz conforming to IEC 60947-2 30 kA at 440 V AC 50/60 Hz conforming to IEC 60947-2 | |
| suitability for isolation | Yes conforming to EN 60947-2 Yes conforming to IEC 60947-2 | |
| utilisation category | Category A | |
| trip unit name | Micrologic 2.3 | |
| trip unit technology | Electronic | |
| trip unit protection functions | LSoI | |
| pollution degree | 3 conforming to IEC 60664-1 |
Revisi instalasi listrik dalam proyek konstruksi biasanya terjadi karena kurangnya koordinasi antara tim desain, perubahan…
Instalasi listrik yang terlihat rapi tetapi sering overheat biasanya disebabkan oleh pemilihan komponen yang tidak…
Instalasi listrik outdoor tetap bermasalah meskipun menggunakan produk tahan cuaca biasanya disebabkan oleh kesalahan dalam…
Penyebab pencahayaan pabrik tidak merata meski lampu banyak biasanya berasal dari kesalahan distribusi cahaya, seperti…
Kesalahan spesifikasi kabel proyek industri dapat menyebabkan overheating, penurunan performa sistem, hingga memperpendek umur instalasi…
Sistem proteksi listrik industri harus dirancang berlapis karena mampu membatasi dampak gangguan hanya pada area…
This website uses cookies.
